Cisco SPA3102

Economico, facile da usare e semplice da utilizzare, lo SPA-3102 permette di connettere apparecchi telefonici standard o FAX a reti basate sul protocollo IP. Lo SPA-3102 integra una porta RJ11 FXS a cui si possono connettere telefoni analogici, fax e centralini tradizionali, e una porta RJ11 FXO per la connessione diretta alla linea telefonica tradizionale. L'interfacciamento alla rete LAN è affidato a due porte ethernet 10/100. Il brand Linksys, " a division of Cisco " come a Linksys stessa piace ribadire, garantisce un'affidabilità ineguagliabile nel campo degli adattatori. L'interfaccia di configurazione via Web consente di creare complessi LCR, e con la presenza di una porta FXO è possibile usare lo SPA-3102 come gateway sfruttando la possibilità di instradare su IP o su rete PSTN le chiamate. In questo adattotore ATA è implementato il suppoto al protocollo T.38, protocollo studiato dall'ITU per la trasmissione dei FAX via IP in tempo reale.

Telephony
• Service Authentication via PIN, Digest, Caller ID (Bellcore Type 1)
• Per Call Authentication and Associated Routing
• Least Cost Routing Support
• Impedance Agnostics - 8 Settings
• Call Waiting, Cancel Call Waiting, Call Waiting Caller ID Detection (Bellcore Type 1)
• Caller ID with Name/Number (Multi-national Variants)
• Caller ID Blocking
• Call Forwarding to PSTN or VoIP Service: No answer, Busy, All
• Do Not Disturb
• Call Transfer
• Three-way Conference Calling with Local Mixing
• Message Waiting Indication - Visual and Tone Based
• Call Return
• Call Back on Busy
• Call Blocking with Toll Restriction
• Delayed Disconnect
• Distinctive Ringing - Calling and Called Number
• Off-hook Warning Tone
• Selective/Anonymous Call Rejection
• Hot line and Warm Line Calling
• Speed Dialing of 8 Numbers/Addresses
• Music on Hold
• Fax: G.711 Pass Through or Real Time Fax over IP via T.38

Product Specific
• VoIP to PSTN (USA) Service Call Origination and Termination
• PSTN (USA) to VoIP Service Call Origination and Termination
• Single Stage and Two Stage Dialing
• Forward Calls to VoIP service - Selective, Authenticated, All
• Forward Calls to PSTN service - Selective, Authenticated, All
• PSTN Line Sharing with Multiple Extensions
• Automatic PSTN Fallback (Loss of Power or IP Service to Unit - with Quiescence to Normal Operations)
• Advanced Inbound and Outbound Call Routing
• Independent Configurable Dial Plans - Up to 8
• Force PSTN Disconnection
• Sequential Dialing Support

VoIP to PSTN Authentication and Routing Features
• VoIP to PSTN Gateway Enable/Disable
• VoIP Caller Auth Method (None, PIN, HTTP Digest)
• VoIP PIN Max Retry Setting
• One Stage Dialing Enable/Disable
• VoIP Caller ID Pattern Matching
• VoIP Access Allowed Caller List (No Further Authentication)
• VoIP Caller PIN and Associated Dial Plan<

PSTN to VoIP Authentication and Features
• PSTN to VoIP Gateway Enable/Disable
• VoIP Caller Auth Method (None, PIN, HTTP Digest)
• Ring Through to FXS Enable/Disable
• Ring Through Tone - Configurable
• Caller ID (Bellcore Type 1) for VoIP Service Access
• Caller ID Enable/Disable
• PIN Max Retry Settings
• Access Allowed Caller List (No Further Authentication)
• Caller PIN and Associated Dial Plan
• Least Cost Routing (via Outbound VoIP - Line1 Dial Plan)

FXO Behavior Features
• VoIP Answer Delay Timer
• PSTN Answer Delay Timer
• VoIP PIN Digit Time-Out Timer
• PSTN PIN Digit Time-Out Timer
• PSTN-to-VoIP Call Max Dur Timer
• VoIP-to PSTN Call Max Dur Timer
• PSTN Ring Through Delay Timer
• PSTN Dialing Delay Timer
• VoIP DIG Refresh Interval Timer
• PSTN Ring Time-out Timer

PSTN Disconnection Detection Features
• CPC (Removal of Tip/Ring Voltage Momentarily)
• Polarity Reversal
• Long Silence (Configurable Time Setting)
• Disconnect Tone (e.g. Reorder Tone)
• Silence Threshold

International Control Features
• FXO Port Impedance - Configurable to 16 settings
• Ring Frequency - Configurable
• SPA to PSTN and PSTN to SPA Gain Settings
• Ring Frequency - Maximum Setting
• Ring Validation Time Setting
• Tip/Ring Voltage Adjustment Setting
• Ring Indication Delay Setting
• Operational Loop Current Minimum Value
• Ring Time-out Setting
• On-Hook Speed Setting
• Ringer Impedance Setting
• Line-in-Use Voltage Setting

Package Content
• 1 - SPA3102 Phone Adapter Unit
• 1 - Power Adapter
• 1 - RJ-45 Ethernet Cable
• 1 - RJ-11 Telephone Cable
• 1- Quick Installation Guide